SJF50-6524A shaft is mainly used in occasions where multi-dimensional space rotation is required. The central shaft can pass through the signal line. It is widely used in DV cameras and mobile phones with DV functions. , The product characteristic parameters are as follows:

1. Product torque: 12.0±2.0kgf.mm;

2. Product rotation angle: 180° left and right rotation;

3. The parallelism of the product cannot be greater than 0.10mm;

4. Life test: life test: 80,000 times (one round-trip calculation, 40 times per minute); after 80,000 times, the spring force attenuation value is not more than 70% of the initial value ;

5. Salt spray test: After keeping for 48 hours in 35±2 ℃, 5±1% Nacl fog environment, its mechanical properties, appearance, etc. meet the requirements ;

6. Mechanical properties: visually and hand-tested, there is no obvious defects or abnormal noise on the surface, and the plastic case is used for fitting detection, and there is no phenomenon such as poor assembly;

Product drawing

Industry applications